Sometimes you may find it necessary to copy a truss or item from the job item grid.
Some examples of when you might find the need to use this function are:
Follow these steps to in order to attach a truss from the job item grid.
1). From the Job item grid RMB click on the truss or item that you want to copy.
2). At this point you can choose whether to copy from another job into the one you are currently working in or copy to another job from the current job.
3). You will then be prompted by the following box in which you can either scroll down and find the job you are wanting to copy it to or just type in the number.
4). If you choose the copy from option, you will get this box which requires you to pick the job and the truss/item that you wish to copy. The same applies to the copy pic file.
5). If you need the truss or panel to be active in your current job, you will have to make sure and check the box to copy pic files as shown.
6). If what you are copying is a hanger or other types of line items, you will not need to check this box.
Please reach out if any further assistance is required.
Helpdesk: 866.237.2878
Email Support: helpdesk@alpineitw.com
www.alpineitw.com
www.alpineacademyitw.com